产品简介
PRODUCT FEATURES
This product is made by blending imported latex powder, high-strength cement, imported cellulose, fine calcium powder, fine sand and other materials; It has the advantages of ultra-high adhesive strength, easy construction, no hollowing, good anti sagging performance, and green environmental protection; Suitable for the construction of ceramic tiles with various water absorption rates.
PRODUCT CHARACTERISTICS
●High adhesive strength. Good water resistance
●Strong deformation resistance. Convenient construction
●Excellent environmental performance. Excellent weather resistance
●Good anti slip performance
MATTERS NEEDING ATTENTION
1. During product construction, relevant national construction standards and the construction process of this product must be followed; The construction environment temperature should be controlled between 5-35℃. Construction is strictly prohibited when it exceeds this range;
2. This product is strictly prohibited from being mixed with other brands of tile adhesives, and any artificial additives such as cement, sand, gravel, cellulose, etc. are strictly prohibited, otherwise it will affect the product quality;
3. Before tiling, the release agent on the back of the tiles must be cleaned thoroughly. If the grooves on the back of the tiles are deep, a double-sided adhesive coating method must be used to ensure the bonding strength;
4. After the tiling is completed, the next step of joint filling can only be carried out after the adhesive has completely dried and solidified;
5. Our company does not assume any responsibility for quality risks caused by exceeding the shelf life or improper use. Please read the product instructions and precautions carefully before use.
PACKAGINGAND STORAGE
1. This product should be stored in a cool and dry place, and attention should be paid to preventing rainwater from getting wet during transportation;
2. Undampened and unopened products have a shelf life of 12 months.
【产品特点】
高分子益胶泥采用进口乳胶粉、高强度水泥、进口纤维素、精细重钙粉、精品细沙等材料调配而成；具有超高粘接强度、易施工，不空鼓、抗垂挂性好、绿色环保等优点；适用于各种吸水率的瓷砖施工。
【产品特性】
●粘接强度高
●耐水性好
●抗变形能力强
●施工便捷
●环保性能优
●耐侯性能佳
●抗滑移性好
【执行标准】
本产品执行JC/T 547-2017《陶瓷砖胶粘剂》标准。
【注意事项】
1、产品施工时需遵循国家相关施工规范及本品施工工艺；施工环境温度控制在5-35℃之间，超出范围时，严禁施工；
2、本品严禁与其他品牌的瓷砖胶混用，严禁人为添加任何水泥、砂石、纤维素等外加剂，否则将会影响产品质量；
3、贴瓷砖前，瓷砖背面的脱模剂必须清理干净，如瓷砖背面的沟隙较深，必须使用双面涂胶的施工方式，已确保粘接强度；
4、铺贴完成后，须等胶浆完全干固后才能进行下一步的填缝工序；
5、我司不承担超出保质期和不正确使用引起的质量风险责任，使用前请认真阅读产品使用说明和注意事项。
【包装与储存】
1、本品应存放于阴凉干燥处、运输过程需注意防止雨水淋湿；
2、未受潮和未开封产品保质期12个月。
